How to Reset Kenwood Radio

  • By: Rafe Gomez
  • Date: 28.11.2022
  • Time to read: 6 min.
How to Reset Kenwood Radio.

When To Reset Your Car Stereo?

Before anything else, it’s worth mentioning that you should only reset your car stereo if absolutely necessary. In most cases, simply restarting the radio will do the trick. However, if your Kenwood radio is acting up and you’ve tried all other troubleshooting methods without success, then resetting the radio may be your best option. You will need to restart your Kenwood stereo if you notice the following:

  • The buttons are acting up and not responding properly

    If you’ve been listening and using the stereo for a while now, the buttons are probably just dusty because of general wear and tear. In this particular scenario, you might want to try wiping the buttons down with a gentle cloth. However, in most instances, the buttons on the screen will become unresponsive, and the display will fog up. In addition to this, the audio quality can also be compromised.

  • The radio is not picking up any stations

    If you’re in an area with a weak signal, it’s possible that your radio will have trouble picking up any stations. If this happens, try resetting the radio to see if that helps. It’s also a good idea to check for software updates, as these can often improve the performance of your radio.

  • The sound is distorted or muted

    If the sound quality of your radio has diminished, it could be due to a number of factors, including poor reception, interference from other electronic devices, or simply because the speakers are dirty. Again, resetting the radio may help to improve the sound quality.

  • The radio display is flickering or frozen

    If the display on your Kenwood radio is flickering or frozen, it’s likely due to a software issue. In this case, resetting the radio may help to resolve the problem.

    Overall, you should only reset your Kenwood radio if you’ve tried all other troubleshooting methods and the problem persists. If you’re unsure of how to properly reset your radio, we recommend consulting the owner’s manual or contacting a professional.

Methods of Resetting Kenwood Car Stereo

Methods of Resetting Kenwood Car Stereo.

Follow these methods to reset your Kenwood car stereo according to the model.

Ideal for KDC Line Models

The KDC line models are Kenwood’s mid-range car stereos. If you have a KDC model, follow these steps to reset the radio:

  1. Follow up on the stereos

    Turn the key in the ignition to the ON position, but do not start the engine. This will switch on the stereo in your vehicle. If you see the light appear on display, it indicates that the stereo is active and receiving audio input.

  2. Remove the faceplate from the device while simultaneously pressing the ejector button

    There is a button displayed with a “detach” label on the side or back of your car stereo. Once you find it, press and hold it while simultaneously removing the faceplate. This will detach the faceplate from the device. Remember to handle it with care because the faceplate is delicate and can be easily damaged.

  3. Press and hold the reset button for about 5 seconds

    You will see a small hole on the left side of the opening where the faceplate was. This is the reset button. Use a paperclip or a similar object to press and hold the reset button for about 5 seconds. You will hear a beep sound, indicating that the process is complete.

  4. Reattach the faceplate

    Carefully put the faceplate back on and make sure it’s properly attached. You can now turn on your car stereo and see if the problem is resolved.

For Touch Screen Stereo

Touchscreen stereos from Kenwood ‘s high-end car stereos. It has a sleek and modern design with a responsive touch screen. If you have a touchscreen stereo, follow these steps to reset it:

Do a soft reset

If you’re experiencing any problems with your car stereo, one thing you can try is a soft reset. To do this, simply find the reset button (it’s usually a small button in the shape of a triangle and is usually illuminated) and hold it down for five seconds. Your car stereo’s unique settings should remain intact after performing a soft reset. If this doesn’t solve the issue, or if you can’t find the reset button, you may need to consult your car stereo’s manual or contact the manufacturer for further assistance.

Kenwood Factory Reset

Kenwood Factory Reset.

When you’ve done everything you can think of to fix the problem, you may need to reset the Kenwood radio back to its factory settings. This will erase all of your customizations, so be sure to back up any important files or data before proceeding. It may be a hassle, but it’s often the only way to fix serious software issues.

To reset your Kenwood radio to its factory settings, follow these steps:

  1. Locate the eject cd and volume button

    There are two buttons on the faceplate of your Kenwood radio. One is the “eject” button, and the other is the “volume” button.

  2. Press and hold both buttons for about 5 seconds

    Press both buttons simultaneously and hold them down for about 5 seconds. You should hear a beep, indicating that the process is complete. Remember, it is important to press both of the buttons at the same time to work correctly! Once the stereo boots back up, you can let it go.

  3. Tap the Initialize All button

    When you boot back up, you should see a message that says, “Do you want to initialize all settings?”. Tap the “Initialize All” button to confirm. This will erase all of your customizations and return the radio to its factory state.

  4. Press the reset button once again

    After you’ve initialized all settings, you may need to press the reset button one more time. This will ensure that all changes are saved and that the Kenwood radio is properly reset. This step will revert all your settings, so you’d have to set it up again from scratch.

FAQ

What is the best way to reset Kenwood car radio?

There are a few ways to reset Kenwood car radios, but the best way is to press and hold the eject and volume buttons simultaneously for about 5 seconds. This should reset the radio back to its factory settings. And users state that the said method works most of the time perfectly.

Is there a reset button on a Kenwood?

Yes, there is a reset button on Kenwood stereos. It's usually a small button located on the faceplate of the stereo.

How do I know if my Kenwood radio is reset?

The stereo is reset if it reverts back to its factory settings. This means that all of your customizations will be erased, so be sure to back up any important files or data before proceeding.

How do I hard reset my car radio?

A hard reset should only be done if a soft reset doesn't fix the problem. To do a hard reset, find the fuse box in your car and remove the fuse for the radio. Wait about 30 seconds before putting the fuse back in. This should reset the radio and clear any stored data. If this doesn't work, you may need to consult your car's manual or contact the manufacturer for further assistance.

What is a hard reset button?

A hard reset button is a physical button that can be pressed to reset the device. This will erase all of the clock settings, alarms, and other customizations. It's often used as a last resort to fix serious software issues.

Conclusion

Resetting your Kenwood stereo may vary from model to model. In general, you can factory reset your Kenwood radio by pressing and holding the eject and volume buttons simultaneously. This method is the most effective way to reset the radio, and it should work on most models. If this doesn’t work, you may need to consult your car’s manual or contact the manufacturer for further assistance.

Either way, there are absolute fixes, and you should have your Kenwood radio back to normal in no time with the tips and methods above. Happy listening!

Pioneer vs Kenwood.

Previous Post

Pioneer vs Kenwood

Next Post

How to Reset a JVC Radio: A Step-by-Step Guide
How to Reset a JVC Radio.